Genesis-gallery-00007
Genesis-gallery-00004
Genesis-gallery-00001
Genesis-gallery-00002
Genesis-gallery-00005
Genesis-gallery-00003
Genesis-gallery-00006
COLDROOMS/

GENESIS SYSTEM

Versatility without compromises

brochure
info close
genesis-features-esploso-pannello

THE GENESIS SYSTEM

The Genesis system allows to realize refrigerated coldrooms of any form and dimension of elevated quality and design.
Thanks to the edges [1] in PVC selfextinguishing, inserted during the injection of the polyurethane it ‘s possible to produce finished panels and ready for the assemblage of any dimension. For the coating is used exclusively series of galvanized metal sheet [2] EN 10142 (UNI 5753-75) sp. 0,5 mm with prymer [3] on the internal surface for anchorage to polyurethane with external covering [4] in PVC peel of orange (scratch resistant). The special fixing Criocabin hooks [5], drowned in the polyurethane, allows a quickly and perfect assembly and they can be opened and closes several times in line with any future changes.

OPTIONAL
• Co-laminatedmetal sheet “steel gray” [2] galvanized EN 10327 th. 0,5 mm with prymer [3] on the internal surface for anchorage to polyurethane, external covering [4] in PET with protection film.
• Plastified metal sheet in light walnut or dark oak wood finish.
• Stainless steel 304 18/8-18/10: thickness 0,6 mm for panels, type AISI 304 (UNI X5CrNi1810) with Scotch-Brite finishing, with treatment of the internal surface for anchoring the polyurethane.
• 304 stainless steel with thickness greater than 0.6 mm.
• Stainless steel 316 18/8-18/10, thickness 0,6 mm for perimeter panels, type AISI 316 (UNI X5 CrNiMo 1712) with 2B smooth finish, with treatment of the internal surface for anchoring the polyurethane. Suitable for environments rich in chlorine ions and for foods and materials containing salt.

genesis-features-cella

QUICK AND PERFECT ASSEMBLY

Each panel of the coldroom is custom made, are not necessary cuts or adjustments during assembly.
Thanks to the joint between walls, ceiling and floor the imperfections in the floor do not create antiaesthetic cracks and installation is fast and always perfect.
The presence of only vertical joints, together with rounded corners, giving essential design and modern, as well as allowing better hygiene and easier cleaning.

genesis-features-porte

DOORS

Semi-recessed door.
External frame in plastic-coated metal sheet with an inserted PVC profile with a rounded corner for condensate-free connection to the internal plate, PVC gasket with double tube that fits onto the frame for simple replacement, lifting hinges with screws not accessible from outside, 1-point closing with internal button for safety release and lock with easily obtainable replaceable block.
Low-temperature version 100-140 mm thick with replaceable heating cable 220 V - 10 W/m (or 24 V on request) with double insulation protected by a metal sheath and housed in the door jamb in a PVC profile.

On request you can have also sliding doors and doors of any dimensions.

genesis-features-pavimento-standard

FLOORS STANDARD

STANDARD
Walk-in.
Maximum static load with uniformly distributed weight 3.000 kg/m²
A. Plastic-coated metal sheet finishing 0,7 mm anti-slip
B. Chipboard support 10 mm thick glued onto the inside

genesis-features-pavimento-K1000

FLOORS K1000

K1000
Suitable for trolley.
Suitable for transit of trolleys with soft rubber-tired wheels with a total weight not exceeding 250 kg per wheel.
Maximum load with uniformly distributed weight 5.000 kg/m²
A. 1 mm hardened stainless steel certified R12 with anti-slip finishing
B. Chipboard support 18 mm thick glued onto the inside
C. Reinforcing studs positioned in a honeycomb pattern

genesis-features-pavimento-K2000

FLOORS K2000

K2000
Suitable for trolley.
Suitable for transit of trolleys with a total weight not exceeding 2.000 kg.
Maximum load with uniformly distributed weight 5.000 kg/m² (this floor is particularly recommended for bakery sector)
A. Phenolic resin stratified support 10 mm thick
B. Reinforcing studs positioned in a honeycomb pattern

genesis-features-pavimento-K200-R12

FLOORS K200

K200 - R12
Walk-in.
Maximum static load with uniformly distributed weight 3.000 kg/m²
A. 0,6 mm AISI 304 stainless steel finishing R12 certified, anti-slip.
B. Chipboard support 10 mm thick glued onto the inside

genesis-features-pavimento-K1600

FLOORS K1600

K1600
Suitable for trolley.
Suitable for transit of pallet trucks with a total weight not exceeding 1.600 kg.
Maximum load with uniformly distributed weight 5.000 kg/m²
A. Aluminium lined finishing
B. Galvanized metal sheet th 0,6 mm
C. Chipboard support 18 mm thick glued onto the inside
D. Reinforcing studs positioned in a honeycomb pattern

genesis-features-pavimento-K2000-R

FLOORS K2000R

K2000R
K2000 floor with reduced insulation (35 mm)

For more information about this product

Select your language:
rotate landscape